backyard boarder co
DIY Ski/Snowboard Rail Butterfly Bracket (4 brackets come in the kit)
DIY Ski/Snowboard Rail Butterfly Bracket (4 brackets come in the kit)
Couldn't load pickup availability
Share






$15.00

SS - Product Addons
Select product(s) to see addons appear.
This message only appears in theme editor.
Learn More
Backyard boarder co hoodie + 2 Free stickers
$69.99
4 butterfly brackets
Optional Add-on:
necessary hardware (nuts, bolts and washers) to build two legs
Pipe and lumber are NOT included in the kit
4 butterfly brackets
Optional Add-on:
necessary hardware (nuts, bolts and washers) to build two legs
Pipe and lumber are NOT included in the kit
- Drill with 3/8 inch bit (or slightly larger)
- Two 9/16 inch wrenches
- Hand saw
- One PVC pipe with diameter 6-8 inches (length of your own choice)
To make a rail with 1 ½ feet tall legs and cross beam
One 2 inch x 4 inch x 10 feet piece of wood OR
One 2 inch x 6 inch x 10 feet piece of wood
If purchasing your own hardware:
Eight - 3/8 x 1- 1/2 inch Grade 5 Hex bolts
Eight - 3/8 x 2-1/2 inch Grade 5 Hex bolts
Four - 3/8 x 3-1/2 inch Grade 5 Hex bolts
Twenty - 3/8 inch Nylon Nuts
Eight - 3/8 Washers
- Drill with 3/8 inch bit (or slightly larger)
- Two 9/16 inch wrenches
- Hand saw
- One PVC pipe with diameter 6-8 inches (length of your own choice)
To make a rail with 1 ½ feet tall legs and cross beam
One 2 inch x 4 inch x 10 feet piece of wood OR
One 2 inch x 6 inch x 10 feet piece of wood
If purchasing your own hardware:
Eight - 3/8 x 1- 1/2 inch Grade 5 Hex bolts
Eight - 3/8 x 2-1/2 inch Grade 5 Hex bolts
Four - 3/8 x 3-1/2 inch Grade 5 Hex bolts
Twenty - 3/8 inch Nylon Nuts
Eight - 3/8 Washers
The kit is designed and made in Canada. It is perfect for your backyard or local park to create a great all year round rail to improve your snowboard jibbing and is easy to make at home. Minimal tools are required. Assembly time is approximately one hour. The wood construction legs are inexpensive and can be adjusted to your riding level to create the perfect practice rail for a beginner to intermediate to advanced rider. This DIY rail assembly kit is recommended to create a rail for people under 200 pounds.
The kit is designed and made in Canada. It is perfect for your backyard or local park to create a great all year round rail to improve your snowboard jibbing and is easy to make at home. Minimal tools are required. Assembly time is approximately one hour. The wood construction legs are inexpensive and can be adjusted to your riding level to create the perfect practice rail for a beginner to intermediate to advanced rider. This DIY rail assembly kit is recommended to create a rail for people under 200 pounds.
Snowboarding, skateboarding and the like are dangerous sports and could result in serious injury or even death.
Ride within your ability.
Always wear a helmet and safety gear.
Follow traffic and pedestrian safety rules.
Use at your own risk.
Snowboarding, skateboarding and the like are dangerous sports and could result in serious injury or even death.
Ride within your ability.
Always wear a helmet and safety gear.
Follow traffic and pedestrian safety rules.
Use at your own risk.
Patent pending in Canada and USA
Design pending in Europe and UK
Designed and made in Canada
Patent pending in Canada and USA
Design pending in Europe and UK
Designed and made in Canada
"Genuine feedback! Incredible! I build PVC rails all the time and I've gotten very good at building them quickly. Your product saved about 30 minutes of time to build. My brother and I built it the night before the jam in a snow storm and we built it extremely quickly. All the hardware made it super easy and self explanatory. When we set it up for the rail jam carrying it was the best part. It is so nice having a light rail to carry compared to ones we have with the wood bases. And because the legs angle out it hardly required any digging into the snow to be solid. Normally those bigger tubes are wobbly on a flat wood base but with your product it didn't budge at all. And when the PVC eventually cracks it will be so easy to just take off the legs and put them on a new pipe. Thanks so much! The people were hyped on it. Can't wait to show the jam footage!! -Wyomingrailyard.