As shown in the photo:  

• · the horizontal base is a 2 inch x 4 inch (or 2 inch x 6 inch) by 24 inch long 
  
• · the vertical support is a 2 inch x 10 inch by 15 inch to the bottom of the V 
  

Pros

• · Lightweight – easy for one person to carry 
  
• · Legs go straight down and are out of the way 
  
• · Easy to mount to any tube with a recommended diameter of 6-8 inches 
  

Cons

• · Would not recommend building it higher than 15 inches 
  
• · For aggressive side hop-ons, option 2 or 3 is recommended 
  
• · Should bury the base under snow

As shown in the photo:

• · Each support consists of three pieces of lumber – each is 2 inch x 4 inch x 18 inch height 
  

2 / 2

• · Four internal supports – each support is 2 inch x 4 inch x 93 inch 
  
• · One 4 feet x 8 feet plywood at least 7/16 inch thick  
  
• o cut into 2 pieces that are each 8 ft x 18 inch  
  

Pros

• · Easy to mount to any tube with a recommended diameter of 6-8 inches 
  
• · Can increase the height by proportionately increasing all the dimensions 
  
• · Very strong for side hop-ons 
  
• · Does not need to be buried under snow 
  
• · Sturdy and doesn’t move 
  
• · More versatile and can be a wall ride or spine, depending on dimensions and how you ride it 
  

Cons

• · The heaviest option – will likely require 2 people to carry 
  
• · The length of the tube is limited unless you are willing to purchase more than one plywood sheet and a longer length of 2 x 4 piece of lumber